Quick Answer
The calculate pressure loss from sudden pipe expansion computes delta_p from the input values you provide.
Calculator
ToolFusion Engineering Network
Access thousands of engineering calculators, standards, and design tools. Join the ToolFusion network for comprehensive engineering resources.
Explore ToolFusionResult Interpretation
Calculate pressure loss from sudden pipe expansion computes delta_p in Pa using the defined engineering formula and the input values provided. delta_p is expressed in Pa. No universal acceptance threshold is defined by this calculator.
Worked Example
default_test
Given:
- v_flow = 3
- d_large = 100
- d_small = 50
- rho_fluid = 998
Expected Result:
- delta_p = 2526.1875
Engineering Interpretation:
Under the given input conditions, the calculated result is: delta_p = 2526.1875 Pa.
The actual numerical result is computed by the Runtime engine using the persisted tool definition. The values shown here come from deterministically validated test cases.
Formula / Method
delta_p = 0.5 * rho_fluid * pow(v_flow, 2) * pow(1 - pow(d_small, 2) / pow(d_large, 2), 2)delta_p.
Variables
| Symbol | Label | Role | Description |
|---|---|---|---|
| rho_fluid | rho_fluid | INPUT | rho_fluid |
| v_flow | v_flow | INPUT | v_flow |
| d_small | d_small | INPUT | d_small |
| d_large | d_large | INPUT | d_large |
| delta_p | delta_p | OUTPUT | delta_p |
Calculation Steps
- Enter the rho_fluid in kg/m^3.
- Enter the v_flow in m/s.
- Enter the d_small in mm.
- Enter the d_large in mm.
- Read the delta_p (Pa) from the results.
Frequently Asked Questions
What does this calculator calculate?
The Calculate pressure loss from sudden pipe expansion estimates delta_p based on the input parameters you provide
Why is rho_fluid important in this calculation?
rho_fluid is directly proportional to delta_p. When you enter rho_fluid in kg/m^3, the calculator uses it in the engineering formula to compute the output
How should I interpret the result delta_p?
The calculator outputs delta_p in Pa. For higher pressures, divide by 1000 to express in kPa, or by 101325 for atmospheres. The result is computed directly from the input values using the defined engineering formula
What units should I use for the inputs?
Enter each value in the units shown next to the input field: rho_fluid (kg/m^3), v_flow (m/s), d_small (mm), d_large (mm). Make sure all inputs use the specified units for consistent results
What assumptions does this calculator use?
This calculator uses automatically validated engineering formulas. Results are approximate and should be validated against site-specific conditions, applicable codes, and professional engineering judgment
Related Tools
Calculate head loss in a pipe using Darcy-Weisbach equation
Calculate pressure surge from sudden valve closure (water hammer)
Compute pressure drop in a straight pipe using the Darcy-Weisbach equation for incompressible flow
Compute output force of a hydraulic cylinder from pressure and piston area
Compute Reynolds number for internal pipe flow to classify flow regime for pressure drop and heat transfer analysis
Calculate Reynolds number for internal pipe flow
Browse More Tools
Explore the full index of engineering calculators on this vertical site.